Blendjet 2 Not Charging | Blendjet Not Charging

If you’re a Blendjet 1 or Blendjet 2 personal blender enthusiast and you’ve found your Blendjet not charging, you’re not alone. We’ve got you covered with all the possible reasons and solutions for this issue. Whether you’re using Blendjet 1 or Blendjet 2, read on to get back to blending bliss.

Blendjet Not Charging | Why Your Blendjet 2 is not Charging? Discover the Causes & Fixes

If your Blendjet personal blender refuses to charge, there’s a handful of reasons that might be behind it. The most common culprits include a damaged battery, a worn out charging cable, a dusty charging port, an insecure cable connection, a malfunctioning power outlet, or even a damaged blender unit. Your Blendjet might also refuse to charge due to overheating safeguards, internal base connection issues, manufacturing defects, and more.

Let’s delve into these causes and their solutions:

1. Insecure Cable Connection

If your charging cable isn’t securely plugged into both your Blendjet 2 and the power source, it won’t charge. Take a moment to double check the connection to ensure it’s snugly in place.

2. Damaged Charging Cable

A damaged charging cable can thwart charging efforts. Over time, cables can wear out due to voltage fluctuations, extensive use, or overheating. Test your cable’s condition, and if it’s damaged, replace it with a new one immediately.

3. Dusty Charging Port

Sometimes, a dusty or debris filled charging port can obstruct charging. Give your charging port a gentle clean using a soft brush or compressed air to ensure it’s free from obstructions.

4. The Power of a Restart

Occasionally, a simple restart can work wonders. Turn off your Blendjet completely, wait for a minute or two, and then power it back on. Try to see if this solves the charge issue.

5. Faulty Power Outlet

A faulty or damaged power outlet could be the culprit. Check the outlet where your blender is plugged in for any issues, and if you’re using a wall adapter, try a different power outlet or USB port on your computer.

6. Troublesome Battery

A defective or damaged battery can be the root cause. Inspect the battery and, if necessary, replace it with a new one following the instructions in your Blendjet blender’s user manual.

7. Blender Check

Sometimes, the problem resides within the blender itself. Test your blender’s charging cable with another compatible appliance. If it charges that device without a hitch, the issue is likely within your Blendjet. Seek expert assistance to pinpoint and fix the problem.

8. Damaged Charging Port

A damaged charging port on your Blendjet can hinder charging. Inspect the port for bent pins or debris. If you find any issues, either fix them yourself or consult a professional technician.

9. Overheating Protection Feature

Blendjet blenders come with safety features to prevent overheating. If your blender gets too hot during extended use, it will temporarily disable charging for self protection. Give it a few minutes to cool down before attempting to charge it again.

10. Faulty Base Connection

Check for any faulty connections inside the blender base, as this can also prevent charging.

11. Blender Base Damage

Ensure your Blendjet blender base is not damaged. Avoid exposing it to water as it’s an electrical component and may get damaged if wet.

12. Manufacturing Defects

In rare cases, your Blendjet blender may have manufacturing defects. If it doesn’t charge from the very beginning, even with everything set up correctly, contact Blendjet customer service for a replacement.

Blendjet Customer Service:

  • Email:
  • Phone Number: 1-844-588-1555
BlendJet 2 Not Charging? Don't Worry, We Can Help!

Quick Steps to Resolve Blendjet Blender Charging Issues:

  • Confirm your Blendjet blender isn’t physically damaged.
  • Make sure that the blender and the power source are both securely bound to the charging cable.
  • Verify the condition of your blender’s battery.
  • Always use the original cable that came with your Blendjet blender.
  • Opt for a high quality, error free cable for charging.
  • Replace a damaged charging cable immediately.
  • Ensure your charging adapter is functioning correctly.
  • Double check the power cord’s condition.
  • Verify the power outlet’s functionality.
  • Ensure that the charging port is clear and dirt free.
  • Maintain the blender’s thermal components.
  • Check for damage in the blender base.
  • Prevent overheating of the blender.
  • Investigate and rectify any faulty connections within the blender base.
  • Replace the blender if it’s damaged.
  • Swap out a damaged charging cable for a new one.
  • Seek expert assistance when necessary.
  • Avoid using your BlendJet 2 while it is charging.
  • Do not overcharge your BlendJet 2.
  • Store your BlendJet 2 in a cool, dry place.

Don’t let a charging hiccup disrupt your blending experience – follow these steps to get your Blendjet back in action!


Instant Pot Explosion: Ensuring Safety & Efficiency

Pressure Cooker Explosion: Safety Tips & Guidelines

Frigidaire Oven Not Heating? Troubleshooting Guide & Solutions

Samsung Oven Not Heating: Gas & Electric Oven Troubleshooting

Gas Oven Not Heating: Troubleshooting and Professional Solutions

Refrigerator Stopped Running No Sound: Silent Cooling Solution

Leave a Reply

Your email address will not be published. Required fields are marked *